Recommended mounting procedure – BrightSign LS322 Hardware User Manual
Page 16
LS322, LS422 User Manual and Operations Guide
13
All information provided in this reference manual applies to products under development. The characteristics and specifications of these products are subject to
change without notice. BrightSign assumes no obligation regarding future manufacturing unless otherwise agreed to in writing. © BrightSign LLC, 2015
RECOMMENDED MOUNTING PROCEDURE
The LS322/LS422 can be mounted on a wall using the brackets attached to each side. BrightSign recommends mounting
the device using four screws with a major diameter between 3.5mm and 4.2mm. BrightSign does not recommend using
nails to mount the device.
This manual is related to the following products: