BrightSign BSNEE Upgrade Guide v.3.9 - Manual (Page 10)

BSNEE Installation Guide 8
POST-INSTALLATION
Configuring BrightAuthor
BrightAuthor installations will need to be configured to connect to the BSNEE instance.
BrightAuthor install files can be configured using the latest version BrightAuthor Configurator,
which is available on the
Software Downloads page.
If you were previously using BSNEE 3.3, and did not change any node names during the
update process, follow these steps while running the Configurator:
1. Enter the Base Domain Name for the BSNEE instance.
2. Check the Advanced Configuration box.
3. For the Application Services node, use a “fileservices” domain instead of an “api”
domain (e.g. “fileservices.mydomain.com”).
4. For the Device Handlers node, use a “services” domain instead of a “handlers” domain
(e.g. “services.mydomain.com”).
5. For the Storage node, enter the same BSNEE Persistent Storage URL that was used
previously.
6. Enter the WS-* Endpoint DNS Identity (CN): This value must match the CN of the
certificate that was assigned to the Web Services node.
Configuring MIME Types in IIS
BSNEE 3.9 includes support for additional media-file formats, including .ogg, .m2ts, and .flac.
If you’re using an IIS server as the Persistent Storage, you will need to register these MIME
types with the server.
• If using Windows Server 2008 or Windows Server 2008 R2 (IIS 7 or 7.5):
o .ogg – audio/ogg
o .m2ts – audio/mpeg
o .flac – audio/flac
• If using Windows Server 2012 or Windows Server 2012 R2 (IIS 8 or 8.5):
o .flac – audio/flac