Boland Communications HD Series User Manual
Page 3
Specifications subject to change without notice
HD Series OSD Operations Page 3 of 5
Composite 1
Composite 2 ***
S-Video 1 ***
S-Video 2 ***
Component 1 ***
Component 2 ***
The source name above will disappear off the OSD menus when an above switch is set to Off.
Auto Power
OFF / ON
ON
– Enable soft power off function (monitors powers Off in absence of input signals)
OFF – Powering Off function is disabled (monitor stays powered On even if signal is lost)
De-interlacing Mode* 4
AFM
: Auto Film Mode (auto detection of 3:2 film pull-down)
TNR
: Temporal Noise Reduction (normally OFF)
MADI
: Motion Adaptive De-Interlacing
DCDi
: Directional Correlation De-Interlacing* (Low Angles)
[See Appendix for descriptions of AFM, TNR, MADI, DCDi]
Enable RGB SOG
OFF / ON
(Enable detection of
S
ync signal
O
n
G
reen channel (VGA))
Video Standard (SD)* : Auto / NTSC / NTSC 4.43 / PAL / PAL M / SECAM
(Auto is default)
Gamma : 0.6 / 0.7/ 0.8 / 1.0 / 1.6 / 1.8 / 1.9 / 2.0 / 2.1 / 2.2 / 2.3 / 2.4 / 2.5 / 2.6 / User Setting
(2.2 is nominal)
OSD 4
OSD Position :
H POS
: Move the OSD menu image horizontally on screen
V POS
: Move the OSD menu image vertically on screen
OSD Timeout : ON – 60 (sec) : Adjust the OSD menu timeout period in 5 second steps
(max 60 seconds)
ON =
Display OSD menu continuously
(use Menu key to exit).
60 = Menu clears 60 seconds after last button push.
Markers 4
Screen Markers : On/Off (all)
Center Marker : On/Off
Safe Area Enable : On/Off
Aspect Marker Enable : On/Off
Safe Area Marker : 80%~99%
Aspect Marker : 4:3/16:9
Transparency Level : 0% / 25% / 50% / 75% / 100%
Exit menu
Language : English / Spanish / French / German / Chinese :
Select OSD menu language display
Transparency :
OFF / ON
Menu OSD is opaque or semi-transparent on screen
Display Input :
OFF / ON
Display input source name briefly after switching sources.
Real time clock
4 Show and edit the internal clock
(this function is valid when “Display Input”,
just above, is set to ON.)
DATE : DD/MM/YYYY : Day/Month/Year
TIME : HH/MM/SS (AM/PM) : Hour/Minute/Second
SETUP 4
Month / Day / Year
Hour / Minute / AM/PM
Display Clock:
Disables or enables real time clock display while displaying
the video source's name after switching video input.
(On Screen Display Menu System)
*Faroudja Laboratories