Bluelab pH Pen - Manual (Page 8)

English
8
Bluelab Probe Care - pH
The instrument is only as accurate as
the probe is clean!
Bluelab pH Probe KCl Storage
Solution
The perfect solution to store and hydrate
your Bluelab pH products.
Probe cleaning is one of the most
important parts of owning and operating
any Bluelab meter, monitor or controller.
If the probe is contaminated (dirty) it affects
the accuracy of the reading displayed.
Bluelab pH Probe KCl Storage Solution is designed
to increase response time and maximize the life of
Bluelab pH pens and pH probes.
For best results, use the KCl solution to store the pH pen/
probe after use and hydrate monthly.
Instructions are on the label of the bottle.
› Bluelab pH Pen
› Bluelab Soil pH Pen
› Cleaning instructions inside box lid
› 500ml pH4.0 and pH7.0 calibration
solutions
› Bluelab pH Probes
› Bluelab Soil pH Probes
› Plastic cups
› Bluelab pH Probe Cleaner
› Toothbrush (probe cleaning instrument)
Bluelab Probe Care Kit - pH contents:
Use Bluelab pH Probe KCl Storage Solution with:
10.0 Technical specifi cations
Measurement range 0.0 - 14.0 pH
Resolution 0.1 pH
Accuracy (at 25°C / 77°F) ± 0.1 pH
Temperature compensation Automatic
Operating temperature 0 - 50 °C, 32 - 122 °F
Calibration Manual calibration, 2 or 3 points
Units pH, °F and °C
Power source 1 x AAA alkaline battery