Blu Bathworks TEP211 - Manual (Page 10)

2014-02
1 866 907 0122 blubathworks.com
9
Step 3 Step 4
Step 6 Step 5
If required, use the supplie template to mark the
position of the control mixer fixing holes in the
selected location.
Important:
• Flush through the pipework before connection
• Filter screen for inlet is highly recommended
Fully insert the inlet hoses (M10) into the inlet valves
(Hot & Cold).
Fix the control box in position using the
screw kit supplied.
Attach outlet hose. Do not over-tighten.
H C
M10
Hand-tighten inlets only.