Step 9 step 10 – Blu Bathworks TEP131 User Manual

Page 12

2013-12

1 866 907 0122 blubathworks.com

Step 9

Step 10

Connect an all-pole mains switch in the
electrical installation in accordance with
the current wiring regulations.

Note:
• the electrical installation and testing must be

carried out by a qualified electrician

• Electrical connections and the minimum

distances between water and electricity
connections must be installed or laid out in
accordance with the valid national regulations.

• Equipment for protection against faulty currents

must be installed (residual current circuit
breaker), N=30mA

• All work on the electronic components must be

only carried out under absence of voltage

Note: Damages to the faucet resulting from incorrect handling and installation are not covered in the manufacturer’s warranty.

Refit the control box cover.