Inspect the installation – Blu Bathworks TSP100 User Manual
Page 5
2014-01
1 866 907 0122 blubathworks.com
®
4
Inspect the Installation
1. Remove the flow restrictor assembly from the spout using the tool provided. Carefully open the hot and cold valves
to flush out any debris in the supply lines.
2. Inspect all connections for leaks. Reinstall the flow restrictor assembly.
3. Push down on the drain stopper to close the drain then fill the sink with water to make sure the stopper operates
and seals properly.
4. Push down on the stopper to open the drain. If the stopper has to be removed, simply unthread it by turning the
stopper counter clockwise.