Blu Bathworks TSP511 - Manual (Page 7)

2013-07
1 866 907 0122 blubathworks.com
®
6
MAINTENANCE
Diverter cartridge change and cleaning
To clean the filters:
•
Close the inlets valves water supply
• Remove the on/off control lever (1), remove grub screws (2) with 2.5mm / 1 / 8 ” Allen key, take off the
on/off control knob (3).
• Unscrew the flange (4) using 19mm / ¾” spanner.
• Remove the diverter cartridge (5)
• Before re-assembling the diverter cartridge(5) clean its housing with wet cloth and grease the gasket
at the bottom of the cartridge.
• Place the new diverter cartridge by inserting the two pivots into the corresponding seats.
• Place the new cartridge(5), inserting the two pivots into the corresponding seats.
• Re-fit on/off control knob (3).
• Re-fit control lever (1).