Blu Bathworks TSP511 - Manual (Page 3)

2013-07
1 866 907 0122 blubathworks.com
®
2
INSTALLATION
Base Fitting - Concrete Floor
• Place the base (2) of the column on the floor. Mark hole locating support.
• Drill the floor with the references of the holes of the floor base.
• Insert the screw anchors (7) into the floor, position the base (2) and fit the screws (8).
• Insert the flexible pipes (1) into the base (2).
• Tighten the nuts of flexible pipes (1) to water supply pipes into the floor before installing.
The nut of hot water connection is painted red.
• Engage the body (5) on the base (2) and fix with the grub screws (6).
• Lower the cylindrical cover (9) and insert it in the seat of the base (2).