Blu Bathworks SB8080 - Manual (Page 2)

1
1 866 907 0122 blubathworks.com
2015-02
®
Attention — Before Installation
Thank you for choosing from among Blu’s quality line of products. We recommend that you carefully read this installation guide to
ensure your shower base’s proper operation and reliability for many years to come.
WARNING: This shower base is made of a quartzite stone and resin. The shower base’s weight may vary between 55 and 200 lbs
(25 and 90 kg). We recommend that the installation be done by a minimum of 2 people as a security precaution. Also make sure
to adopt the proper posture when lifting the shower base.
Adhere to all local building and plumbing codes. The diagrams in this guide are not construction plans. They are visual aids.
Installation Requirements:
1. Observe all of the local hydraulic and building regulations.
2. The following instructions are to be followed by qualified personnel with the technical background and experience
needed to manage the product safely.
3. This shower base should only be used in domestic environments at room temperature.
4. The Manufacturer shall not be held responsible and the warranty shall no longer be valid in case of improper use.
5. Unpack and inspect the shower base to check for possible damages.
6. Place the shower base back in the carton until it is installed.
7. Before installing, check access to the final hydraulic connections.
Technical Support Assistance
If further assistance is required, please contact:
Product Support at 1.866.907.0122 (09:00 – 17:00hrs PST) or email [email protected]
North America
Blu Bathworks Inc.
188 Smithe Street,Vancouver, BC, Canada, V6B 6A9
T +1.604.299.0122 F +1.604.299.0125
Please refer to blubathworks.com for warranty, terms & conditions under warranty & procedure for warranty service.