Bladez Fitness Cascade Rower - Manual (Page 14)

14
STEP 3
Please remove the M8xP1.25x20L Screws (H-3) and Flat Washers (H-2) on the rear Stabilizer
(G). Then fit and attach the rear Stabilizer (G) with slide rail (H-12) with the M8xP1.25x20L
Screws (H-3) and Flat Washers (H-2).
Remarks: Do not screw one set of the M8xP1.25x20L Screws and Flat Washers too tightly at
one time. It is better to fix the four sets firmly at the same time to allow you to change angles
and to level easily.
STEP 4
1. Please remove the M5x35L Screws (H-11) on the Slide Rail (H-12)
2. Pass the Slide Rail (H-12) through the Slide Seat (H-4)
3. Use the M5x35L Screws (H-11) to fix the Stopper (I-5) on the Slide Rail (H-12).