Bladez Fitness U400 Upright Bike - Manual (Page 29)

29
the motor cannot be detected for more than 4 seconds then the adjustment motor’s driver
will be cut off immediately and show E1 on the LCD display. All the other digital and
function marks are blank, and the output signals are cut off.
E2 (ERROR 2): When the monitor read the memory data, if the I.D. code is not correct or
the memory IC is damaged then the monitor will show E2 immediately at power up.
E3 (ERROR 3): Faulty Motor
Technical data of the current adapter:
Available for Input: 110V/50Hz or 60Hz Output: 6V DC/0.5~1A
LCD WORKOUT GRAPHICS:
Program 1 Manual
Program 4 Rolling
Program 7 Ramp
Program 10 Random
Program 2 Steps
Program 5 Valley
Program 8 Mountain
Program 11 Plateau
Program 13 Precipice
Program 3 Hill
Program 6 Fat Burn
Program 9 Intervals
Program 12 Speedplay