Dixon SpeedZTR ZTR 30 - Manual (Page 22)

22
OPERATION INSTRUCTIONS
STARTING INSTRUCTIONS:
1. Parking brake must be on, and blade drive disen-
gaged.
2. Move throttle control to “choke” position if engine is
cold,full throttle if warm.
3. Insert ignition key and turn to “start” position. When
engine starts, release ignition key. Key will return to
“run” position.
4. Move throttle from “choke” to desired speed position.
5. Release parking brake.
6. Operate the mower per the “CONTROL” instructions
on Page 17.
CAUTION
Do not operate the engine in an
enclosed area due to the harmful
exhaust gas produced.
NOTE: When mowing, “blade(s) engaged”, throttle control must
be set to the MAXIMUM or wide open setting to insure
adequate cooling of the engine and to maintain mower
deck blade speed.