Deluo TRISTAR25 User Manual
Page 11
Deluo Electronics http://www.deluo.com
11
3.5 One-Pulse-Per-Second Output
The one-pulse-per-second output is provided for applications requiring precise timing
measurements. The output pulse is 1usec in duration. The rising edge of the output
pulse is accurate to +/-1usec with respect to the start of each GPS second. The
accuracy of the one-pulse-per-second output is maintained only when the receiver has
valid position fix.
3.6 RTCM Differential Data
By using differential GPS (DGPS) correction data in RTCM SC-104 format with message types
of 1, 2, 3, and 9, position accuracy of less than 5 meters can be achieved. RXD1, pin-8 of the
10-pin Molex connector shown in figure 2, or pin-11of the 16-pin header shown in figure 3,is
used as the DGPS input. Differential correction is applied automatically when the correction
data is received at 9600baud.