Storage, Disposal, What if there are problems – Beurer TL 60 User Manual
Page 14: Technical specifications

14
9. Storage
If you are not going to use the device for an extended period of time, disconnect it and store it in a dry place, out
of the reach of children.
10. Disposal
In the interest of protecting the environment, the unit must not be thrown out with the household
waste at the end of its service life. Dispose of the unit at a suitable local collection or recycling point.
Dispose of the device in accordance with EC Directive 2002/96/EC – WEEE (Waste Electrical and
Electronic Equipment). If you have any questions, please contact the local authorities responsible for
waste disposal.
11. What if there are problems?
Problem
Possible cause
Solution
Device does not
light up
On/off button switched off
Switch on the on/off button.
No electricity
Connect the mains plug correctly.
No electricity
The mains cable is defective. Contact
customer services or your retailer.
The fluorescent tube is not correctly inserted
Insert the fluorescent tube correctly
(Chapter 8).
Fluorescent tube has reached the end of its
service life. Fluorescent tube is defective.
Replace the fluorescent tube
(Chapter 8).
12. Technical specifications
Dimensions (WHD)
340 x 480 x 80 mm
Weight
2.625 kg
Lighting elements
2 x 36 W tubes (2G 11), Daylight
Nominal data for replacement
lighting elements
Philips 2G 11, 36 W,
Osram/Dulux 2G 11, 36 W
Nominal data for starter
AC 220 – 240 V, 4 to 65 W
Power
72 watts
Light intensity
10.000 lux (15 - 20 cm)
Radiation
Output of radiation beyond the visible spectrum (infrared and UV) is
so low that it is harmless to eyes and skin.
Mains connection
230 V ~, 50 Hz
Degree of efficiency of the ballast
~ 80%
Source effiency (lm/W) of the bulb
67 lm/W
Color temperature of tubes
6.500 Kelvin
Subject to technical modifications.