Disposal, What if there are problems, Technical specifications – Beurer TL 30 User Manual
Page 12

12
9. Disposal
For environmental reasons, do not dispose of the device in the household waste at the end of its useful life.
Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accordance
with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions, please
contact the local authorities responsible for waste disposal.
10. What if there are problems?
Problem
Possible cause
Solution
Device does not
light up
On/off button switched off
Switch on the on/off button.
No electricity
Connect the mains part properly.
No electricity
The mains part is faulty. Contact cus-
tomer services or your retailer.
LEDs have reached the end of their service life.
LEDs faulty.
If you need to have the unit repaired,
contact customer service or an author-
ised dealer.
11. Technical specifications
Model no.
TL 30
Type
WL 11
Dimensions (WHD)
236 x 156 x 20 mm (26 mm incl. storage slot)
Weight
175 g (260 g incl. mains adapter + storage pouch)
Lighting elements
LED
Power
5 Watts
Light intensity
10.000 lux (10 cm)
Radiation
Output of radiation beyond the visible spectrum (infrared and UV) is
so low that it is harmless to eyes and skin.
Operating conditions
0°C to +35°C, 15 - 90 % relative humidity
Storage conditions
-20°C to +50°C, 15 - 90 % relative humidity
Product classification
External power supply, Protection class II, IP21
Color temperature of tubes
6.500 Kelvin
Included in delivery
Daylight lamp, Holder, Storage pouch, Mains part, These operating
instructions
Subject to technical modifications.
This device meets the requirements of the European Directive 93/42/EEC and 2007/47/EEC Medical Devices as
well as the Medical Devices Act.
This device complies with European Standard EN60601-1-2 and is subject to particular precautions with regard
to electromagnetic compatibility. Please note that portable and mobile HF communication systems may interfere
with this unit. More details can be requested from the stated Customer Service address or found at the end of
the instructions for use.