Beurer MG 158 - Manual (Page 11)

11
5. Appliance description
Massage seat cover (front)
1 5 massage motors
2 Fastening straps
3 Power supply unit with plug connector
4 Hand switch
hand switch
1 button with LED indicator
2 Massage intensity button, upper back
3 Massage intensity button, lower back
4 Massage intensity button, bottom
5 MODE button with LED indicator
6
button with LED indicator
7 Connection cable to the device
6. Operation
• Sit comfortably on the seat cover. Take care that you sit centered and your body is in good even contact
with the seat cover.
• Switch on the massage device with the button.
• Using MODE, choose the desired massage program.
• Using buttons 2 – 4, select the area to be massaged and the desired massage intensity. The activated
massage zones will be shown by the LED indicators.
• The automatic switch-off function is activated by starting the massage and is preset to 20 minutes.
• Press the
button to switch the heat function in the lumbar region on and off.
• Do not use the massage device for longer than 20 minutes. The massage can be finished at any time by
pressing the button.
• After the massage is finished, disconnect the device from the mains.
Note
• Do not use the massage device just before going to bed. The massage can also have a stimulating
effect and may cause difficulties in getting off to sleep.
1
5
7
2
6
3
4
1
2
2
3
4
•
• •
•
•