Hyundai H-CMMD4044 - Manual (Page 19)

19
Preset scan function
· Preset scan: Press the P.SCN button on the panel or press and hold for 2 seconds the RPT/P.SCN button on
the RC to scan all preset stations in the memory of the current band and stay on each memory stations for
about 5 seconds. To stop preset scan, press this button again.
· Auto memory store: Press the P.SCN button on the panel and hold for 2 seconds to enter auto store mode.
The radio will automatically store the 6 strongest available stations to the 6 preset memories of the current
band. To stop auto store, press this button again.
AF (Alternative Frequencies) function
When the radio signal strength is poor, enabling the AF function will allow the unit to automatically search
another station
with the same PI (Program Identification) as the current station but with stronger signal strength.
PS (Program Service name): the name of station will be display instead of frequency.
1. Press the AF button shortly to turn ON or turn OFF the AF function.
AF ON indicator on display will flash until RDS information is received.
2. If RDS service is not available in your area, turn off the AF mode.
Default setting is ON.
TP function
Press the TP button to turn ON or OFF the TP function.
PTY (Program Type)
1. Press the PTY button on the monitor or PROG/PTY button on the RC to activate the PTY function.
2. Press and hold for 2 seconds the PTY button on the monitor.
3. Press the
cursor buttons or rotate the VOL knob on the panel to select the program type (1-31).
4. Press the SEL button (VOL knob) to confirm setting and start searching the PTY.