Beurer MC 5000 - Manual (Page 20)

20
Hand switch button functions
On/off button
> Press the on/off button .
The massage chair is ready for operation.
Pause button
> Press the pause button .
The currently running programme is paused. The massage chair is in standby mode.
> Press the pause button again.
The programme continues from the point it was paused.
Display
The display shows functions that are currently in operation and the current settings.
• The current massage programme
• The current strength and intensity settings
• The current position of the massage rollers
• The remaining duration of the massage
Massage programmes
• The air pressure massage can be activated or deactivated separately.
• Once the massage programme has finished, the massage chair switches to standby mode.
• The massage can be stopped at any time by pressing the massage button again.
• The massage can be paused at any time by pressing the pause button.
The currently selected setting is shown on the display.
Automatic massage programmes
There are three automatic massage programmes Relax, Refresh and Therapy as well as the air pressure
massage.
These automatic programmes massage your entire back with a combination of kneading, tapping, rolling and
Shiatsu massage elements.
Relax
> Press the relax button .
The automatic massage programme starts.
Total duration: 15 minutes. Afterwards, the massage chair switches to standby mode.
Refresh
> Press the refresh button .
The automatic massage programme starts.
Total duration: 15 minutes. Afterwards, the massage chair switches to standby mode.
Therapy
> Press the therapy button .
The automatic massage programme starts.
Total duration: 15 minutes. Afterwards, the massage chair switches to standby mode.
Massage programmes
Kneading
> Press the massage button .
The massage programme starts.
Total duration: 15 minutes. Afterwards, the massage chair switches to standby mode.
Tapping
> Press the massage button .
The massage programme starts.
Total duration: 15 minutes. Afterwards, the massage chair switches to standby mode.