Beurer MC 2000 User Manual
Page 16
16
Warning!
• Keep packaging material away from children!
Choking hazard.
• Before using the device for the first time, read the
‘Safety notes’ section.
w
Safety notes, pages 2 and 3
Caution!
• The Shiatsu office chair could damage your
flooring. Place a suitable, non-slip underlay under
the Shiatsu office chair.
Important!
Do not use sharp or pointed tools (e.g. a Stanley knife)
to remove the packaging.
Installation location
• Install the Shiatsu office chair on a sturdy and even
surface.
Important!
Regularly check the screwed joints to ensure they are
correctly tightened. Tighten any loose screw joints.
5.
Initial use
The MC2000 Shiatsu office chair is delivered in a
cardboard box.
Assembly MC2000
w
MC2000 assembly instructions
Unpacking and assembly
Height adjustment
>
Sit on the office chair
>
Take your weight off the seat and pull the lever
>
Set the office chair to the desired height by placing your weight on
it or taking your weight off it, as required
>
Release the lever
The position is fixed.
Back rest adjustment
>
Sit on the office chair
>
Pull the lever on the left-hand side upwards
>
Move back rest to the desired position
>
Press lever downwards
The position is fixed.
Rocker function adjustment
>
The rotary knob must be turned to the left or right until the rocker
resistance is set as desired.