Beurer GL 40 (mmoL) - Manual (Page 16)

16 Beurer GL40 mmol/L
4 Using the unit for the first time and basic settings
4.1 Removing the battery insulation strip, replacing the batteries
Note
• Two batteries are included in the delivery scope of your blood-sugar measuring device.
They are already inserted in the battery compartment.
• Before using the unit the first time, you must remove the insulation strip.
1 Remove the cover of the battery compartment on the underside of the unit.
2 When you perform a battery change, remove all batteries. While changing the batter-
ies, the device retains the date and time as long as one of the batteries remains in-
serted. If the replacement takes a long time, you may have to adjust the date and
time afterwards (see "Basic settings" on page 17).
3 Insert two new batteries of type CR 2032 3V.
Ensure that the batteries are inserted with the correct polarity,
according to the diagram. See the diagram inside the battery compartment.
4 Carefully replace the lid on the battery compartment.
Note
• When the battery change symbol appears, the batteries are almost empty. Re-
place both batteries as soon as possible.
• When "LP" is displayed, the batteries are so empty that no more measurements are
possible.