Beurer GL 42 (mg/dL) - Manual (Page 21)

Beurer GL42 mg/dL 21
3 Pressing the rocker switch “–” [2] will display the previous measured value each time. You
can display a maximum of 480 previous measurements.
4 You can cancel the process at any time. To do so, press the On/Off button or wait until the
device switches itself off automatically after two minutes.
7.2 Displaying average blood glucose values
You can display the average measured blood glucose value from the last 7, 14, 30 and 90 days.
1 Switch the measuring device on using the On/Off button [5]. The initial display is shown briefly.
Press the “+” rocker switch [2] twice.
The measurement unit of the blood glucose value, “ ” and the average value are displayed.
2 Press “+” [2] repeatedly to display the average value for 7, 14, 30 and 90 days.
3 You can cancel the process at any time. To do so, press the On/Off button or wait until the
device switches itself off automatically after two minutes.
Item explanation
mg/dL Mem
1
2
3
1. Average value
2. Time period, e.g. 7
3. Number of saved values used to calculate the aver-
age
7.3 Displaying average blood glucose values for highlighted values
You can display the average measured blood glucose value for labelled values from the last 7, 14,
30 and 90 days.
1 Switch the monitor on using the On/Off button [5]. The initial display is shown briefly. Press
the “+” rocker switch [2] twice.
The measurement unit of the blood glucose value, “ ” and the average of all measured
values are displayed.