Beurer BM 58 - Manual (Page 26)

26
WHO classification on the unit always indicates the higher
range (grade hypertension in the example described).
Range of
blood pressure
values
Systolic
(in mmHg)
Diastolic
(in mmHg)
Measure
Grade 3: Severe
hypertension
≥ 180 ≥ 110 Seek medical
advice
Grade 2: Mode-
rate hyperten-
sion
160 – 179 100 – 109 Seek medical
advice
Grade 1: Mild
hypertension
140 – 159 90 – 99 Have it che-
cked regularly
by doctor
High-normal 130 – 139 85 – 89 Have it che-
cked regularly
by doctor
Normal 120 – 129 80 – 84 Check it
yourself
Optimal < 120 < 80 Check it
yourself
Source: WHO, 1999
7. Saving, retrieving and deleting results
• The results of each successful measurement are stored
together with date and time. With more than 60 items of
measured data, the earliest items of data measured are
lost.
• Move the touch screen activation switch to the ON posi-
tion.
• Make a selection with the MEM button, and then confirm
the desired user memory with the START/STOP button .
If you press the MEM button again, the average value of
all the stored measured values in the user memory will be
displayed. If you press the MEM button again, the aver-
age value of the last 7 days for the morning measurement
will be displayed (Morning: 5 a.m. – 9 a.m., display ). If
you press the MEM button again, the average value of the
last 7 days for the evening measurement will be displayed
(Evening: 6 p.m. – 8 p.m., display ). If you continue to
press the MEM button, the most recent individual meas-
ured values with date and time are displayed in turn.
• You can delete the memory by pressing and holding the
MEM button for 3 seconds. All the values in the current
user memory are deleted after three beeps are output.
• To switch off the device, press the MEM button again or
the START/STOP button or push the touch screen acti-
vation switch to OFF.
• If you forget to switch off the device, it will switch off
automatically after 2 minutes.