Beurer BM 40 - Manual (Page 23)

23
must be regularly tested for accuracy by appropriate means.
Precise instructions for checking accuracy may be requested
from the service address.
11. Mains part
Model No. FW 7575M/EU/6/06
Input 100 – 240 V, 50 – 60 Hz
Output 6 V DC, 600mA, only in connection with
beurer blood pressure monitor
Supplier Friwo Gerätebau GmbH
Protection This device is double isolated and protected
against short circuit and overload by a pri-
mary thermal fuse.
Make sure to take the batteries out of the
compartment before using the mains part.
Polarity of the the DC voltage connection
Double isolated / equipment class 2
Enclosures and
Protective Covers Equipment enclosed to protect against
contact with live parts, and with parts which
can become live (finger, pin, hook test).
The operator shall not contact the patient
and the output plug of DC mains part simul-
taneously.