Beurer HK 25 - Manual (Page 13)

13
7. Disposal
Please dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Elec-
tronic Equipment). If you have any queries, please contact the appropriate local authorities.
8. What if there are problems?
Problem cause solution
The temperature settings are not illuminated while
- the controller is properly connected to the heating pad
- the mains plug is connected to a working socket
- the sliding switch is set to 1, 2 or 3
The safety system has
switched the heating
pad off permanently.
Send the heating pad
and the controller for
servicing.
9. technical data
See rating plate stamp on the heating pad.