Beurer HD 100 - Manual (Page 14)

14
7. Disposal
Please dispose of the electric overblanket in accordance with Directive WEEE (Waste Electrical and
Electronic Equipment). If you have any questions, please contact the local authorities responsible
for waste disposal.
8. What if there are problems?
Problem cause solution
The indicator lamp is not illuminated while
- the controller is properly connected to the electric
overblanket
– the mains plug is connected to a working socket
- the sliding switch for ON/OFF and temperature settings
is set to 1, 2, 3, 4, 5 or 6
The safety system has
switched the electric
overblanket off perma-
nently.
Send the electric
overblanket and
the controller for
servicing.
9. technical data
See the rating label on the electric overblanket.