Besafe iZi Up X3 User Manual

Page 6

Removing and refitting the cover

Cleaning instructions

• Pay attention when you remove the cover, as fitting the cover

is done in the opposite way.

• The upholstery of the seat consists of 3 separate parts.

• The cover of the seat must be washed according to the

instructions on the inside of the cover (12).

• DO NOT use any aggressive cleaning agents; these may

harm the construction material of the seat.

• Refit the cover, using the previous instructions in

reversed order.

Remove the back rest cover from the seat by open the velcro

at the back, detach the elastic loops from the fixing hooks

and pull the cover carefully from the surrounding rim of the

back rest.

Remove the head rest cover by detaching the elastic loop

from the fixing hooks and pulling the cover carefully from the

surrounding rim of the head rest.

Remove the seat cover by detaching the elastic loops from

the fixing hooks and pulling the cover carefully from the

surrounding rim of the seat.

Removing the cover

Refit the cover

Warning: potential misuse

• It is NOT ALLOWED to mount the seat in a front

passenger seat WITH AN ACTIVATED AIRBAG.

• DO NOT guide the car belt around the

reclining handles.

• DO NOT use the seat without the 3-point belt (13).

(13)

wash with similar colours

(12)

• This is a universal Child Restraint System. It is approved

according to regulation No. 44.04, series of amendments for

general use in vehicles fitted with 3-point car belts, approved

to UN/ECE Regulation No. 16 or other equivalent standards.

Point of sale information

Notice for FORWARD-FACING installation