Besafe iZi Up X3 - Manual (Page 4)

6 7
3-
4-
Slide the lower part of the shoulder belt guide open and
position the belt in the guide. Make sure the belt is not twisted
and close the guide again (3).
Always close the car three point belt into
the buckle before driving, also when the
seat is not in use by a child! (4)
(3)
(4)
Removing the seat
1-
2-
Slide the lower part of the shoulder belt guide open and
remove the belt from the guide (5).
Take iZi Up out of the car.
(5)
click!
• If the seat feels unstable, even after removal of the headrest
of the car, you can use the extra stability strap.
• The stability strap is not an essential safety part and needs
only to be used in cars when the iZi Up is connected with the
3-point car belt and when the head rest of the car can not
be removed.
(2)
Placing the stability strap
• In order to install the stability strap,
put the iZi Up and the headrest of the
car in the most upward position.
• Guide the stability strap between the
cover and the surface of the iZi Up
head rest.
• Then guide the strap around both bars
of the head rest of the car.
• Adjust the iZi Up to the correct height
by turning the height adjusting lever.
• Tighten the stability strap by
connecting the velcro strap as tight
as possible (2).