Besafe iZi Comfort X3 ISOfix User Manual

Page 7

Position the shoulder straps

over the orange marking at

sides of the seat to keep the

harness open while you position

the child (19).

When the child is positioned,

place the shoulder straps over

the child’s shoulders and close

the buckle: CLICK! (20).

Pull the harness strap through

the central adjuster in the

direction of the green arrow

straight up-/forwards. Continue

pulling until the harness is a

comfortable but firm fit (21).

Sleeping position

• The seat has 4 reclining positions.

• By turning the reclining

knob, the seat can be put in

another position (22).

Make sure that the harness straps are always locked and

tightened when the child is in the seat.

(19)

(20)

(21)

(22)

Removing the cover: alternative 1

Pay attention when you remove

the cover, as fitting the cover is

done in the opposite way.

The cover of the head rest

can be taken off separately by

disconnecting the hooks at the

backside and pulling off the

fabric to the front.

Start to take off the

lower seat part (25).

Removing and refitting the cover

• There are 2 versions of the

fabric cover. If there are

velcro squares (see green

arrow (23/24)), follow the

steps of alternative 1. If

there are no velcro squares

go to alternative 2.

Refit the cover

Mount the top part and then the shoulder parts. Mount the

seat part and bring the seat cover under the rear parts of

the sidewalls.

Pull the head rest in the highest position. Mount the head rest

cover and connect the hooks at the back side. Pull the harness

straps through the holes. Connect the loose bottom part of the

head rest fabric with the plastic part under the head rest.
Pull the harness straps through the opening of the seat cover

and lock the harness buckle. Pull the crotch strap through the

opening of the seat part.

(23)

(24)

(25)

This manual is related to the following products:

iZi Comfort X3