Datexx EXACTIME DRC-700 - Manual (Page 3)

10 11
9 8
PM
DAY DATE MONTH
PM
DAY DATE MONTH
DAY DATE MONTH
DAY DATE MONTH
DAY DATE MONTH
• Press TIME SET for the last time to return to the
time of day with seconds, after the last parameter
is set.
TIME FORMAT
• Press UP button to toggle between
12 and 24 hour time formats
DAY OF THE WEEK LANGUAGE
• Press and hold DOWN/LANG button
for 3 seconds: the default language
abbreviation will flash
(example – ENG)
• Continue holding DOWN/LANG button until
the desired day of the week language
abbreviation (ENG SPA FRE GER ITA)
is selected
TEMPERATURE DISPLAY
• Press WAVE/C°/F° button to toggle
between Celsius and Fahrenheit.
AM
DAY DATE MONTH
DAY DATE MONTH
PM
DAY DATE MONTH
SPECIFICATIONS
Indoor Temperature
Proposed operating range : -5.0°C to +50.0°C/
23.0°F to 122.0°F
Temperature resolution : 0.1°C/0.2°F
User-selectable (F° or C°) temperature display
Calendar and Clock
12/24 hour display in hh: mm format
Date format: month – day format
US Time Zone map
Day of the week: User-selectable in five languages
(English, Spanish, French, German,
Italian)
Wall Mount or Table Stand
Power
2 AA size (UM-3) 1.5V batteries (not included)
Dimensions
8.75(L) x 5.35(H) x 1.15(D) inches
DAY DATE MONTH
DAY DATE MONTH
DAY DATE MONTH
DAY DATE MONTH
MANUAL SETTINGS
TIME ZONE
Option One
Slide the TIME ZONE switch to the
desired US Time Zone position.
Option Two
• Select the Time Zone by pressing and holding the UP
button for 3 seconds.
• Keep holding UP button until the desired time zone
(Pacific, Mountain, Central or Eastern) is highlighted
on the unit’s display map.
CLOCK
• Press and hold TIME SET button for 3 seconds:
the hour will flash. Press UP or DOWN/
LANG to change flashing digits.
• After the first value is set, press
TIME SET button again to confirm
and move to the next parameter.
• Continue setting minutes, year,
month and date.
INDOOR TEMPERATURE
The indoor temperature shares the same line calendar
and the day of the week.
NOTE: If the indoor temperature goes above or below
operating range stated in specifications, the display
will show dashes [ ]
HOW TO USE THE TABLE STAND
The clock has an unfolding table stand that supports it
on the flat surface. The unit can also be mounted on the
wall using the recessed screw hole. The table stand must
be folded prior to mounting.
PRECAUTIONS
This product is engineered to give you years of
satisfactory service if handled carefully. Here are
a few precautions:
1. Do not immerse the unit in water.
2. Do not clean the unit with abrasive or corrosive
materials. They may scratch the plastic parts and
corrode the electronic circuits.
3. Do not subject the product to excessive force, shock,
dust, temperature, or humidity, which may result in
malfunctions, shorter lifespan, damaged batteries,
and damaged parts.
4. Do not tamper with the unit’s internal components.
Doing so will invalidate the warranty and may cause
The unit contains no user-serviceable parts.
5. Use only fresh batteries. Do not mix new and old
batteries.
6. Read the user's manual thoroughly before operating
the unit.