Daewoo DLP-20J1 - Manual (Page 14)

14
Preparation
TV/AV MODE SELECTION
Press the TV/AV(
) button on the control panel repeatedly to select the source.
You can also select the source using TV/AV( ) button on the remote controller.
TV AV1 AV2 S-VIDEO TV
In TV mode, you can change the TV programme number with the UP/DOWN button or the
NUMBER button.
NOTE: When the TV SET has no signal, a screen saver will appear on the screen.
AV INPUT JACK (AV2)
This jack has video / audio inputs.
It is used to connect a VCR, Camcorder, DVD, STB, Video game.
S-VIDEO INPUT JACK
It has Y/C inputs. This jack is used to connect S-Video equipment.
SCART JACK (AV1)
This jack has video / audio inputs and outputs, RGB inputs.
It is used to connect a STB, VCR, DVD.
When the signal is RGB, the TV set switches automatically to AV1 mode.
In most cases, the TV set switches automatically to AV1 mode, when the external equipment is
connected in playback mode. If not, then use the AV button to select AV1.
HEADPHONE JACK
Insert the headphone plug (3.5 mm ø) into this jack(
).
You can control the headphone sound with the OK button on the remote controller
(see page 17).