Belshaw Adamatic AutoFiller Donut Injector - Manual (Page 11)

FG053 -JAMMER 22-08-14 Rev A14 11
10.0 SETTING
1.0 Press the green panel (1) on the membrane to activate the display.
2.0
Press the blue panel (2) to move the display to the required number.
Or
Press the blue panel (3) to move the display by one digit at a time.
(To set back to zero turn off (4) and back on (1)
NOTE
THE FIGURES ON THE DISPLAY DO NOT REFER TO ANY QUANTITY OR TIME
BUT ARE FOR REFERANCE PURPOSES. When the correct settings for each
product are found it is suggested they are noted down for future reference.
3.0
By pushing the products onto the nozzles and against the actuator tray an exact
amount of filling will be delivered time after time.
When finished the machine is turned off by pressing the red (4) panel.
Be aware that if the actuator tray is operated, filling will be dispensed out of the nozzles
ON
OFF
FAST FORWARD
FORWARD 1 DIGIT
1
4
2
3
DISPLAY