Belshaw Adamatic H&I-2 Icer - Manual (Page 8)

Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
2 MN-1731EN H&I All Models OM
2 Cleaning
For your safety, observe the following warnings
throughout the entire cleaning process.
WARNING
Thoroughly clean and dry the floor if
glaze, water, or other materials are spilled.
Materials spilled on the floor can cause
serious injury or loss of life
WARNING
To avoid the possibility of shock, unplug
the unit before cleaning
Once per week, clean as explained below.
WARNING
To avoid being burned, wait for icing pan
to cool before removing
1. Unplug the unit. Remove any debris from
the work area before disassembling the
H&I.
2. Remove bowls, lid and thermometer and
wash with warm soapy water, rinse and
wipe dry.
3. Drain water from kettle, using the drain
valve on the back of the machine.
IMPORTANT
To avoid damage to the wire / frame, use
caution when removing and transporting
the wire / frame
4. Clean the H&I with warm water and mild
cleaner.
5. Sanitize the H&I
6. Install one empty icing bowl.
7. Fill kettle with hot water until the empty
icing bowl is floating ½ in off the cover.
8. Return the remaining bowls, lids and
thermometer to the kettle
9. Plug in H&I
10. Turn on power switch.
IMPORTANT
Do not hose down electrical components