Belshaw Adamatic H&I-2 Icer - Manual (Page 3)

If you accept the machine from the shipping
company, you are, in effect, saying that the
machine is in good condition, and you must
pay for the machine. Belshaw cannot pay for
shipping damage, because the freight company
has accepted the machine from Belshaw in good
condition, and is responsible for its safe delivery.
For your protection, inspect the machine to see
that no parts are bent, scratched, or otherwise
damaged. If any damage has occurred in
shipping, file a freight claim with the shipping
company immediately. To transport the H&I to the workstation and
unpack it:
1. Break down the shipping crate.
3. Remove all the packing materials from the
H&I, including foam, tape, brown paper,
plastic, and white protective coating.
IMPORTANT
Keep this manual for future reference.
EQUIPMENT RECORD
Please provide the information below when you correspond with us about your machine.
Purchased by ______________________________________________________________________
Installed by _______________________________________________________________________
Date of installation __________________________ Model number _________________________
Serial number ______________________________________________________________________
011108
MN-1732EN
Belshaw Bros., Inc.
814 44 th Street NW, Suite 103
Auburn, WA 98001 USA
Phone: +-1-206-322-5474 • Fax: +-1-206-322-5425
Email: [email protected] • http://www.belshaw.com