Belshaw Adamatic HI18 Econo-Icer - Manual (Page 11)

Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
Econo-Icer HI18 & HI24 OM MN-1747EN 5
3 Maintenance
Lubrication
WARNING
To avoid serious burns or other injury,
always disconnect the machine from the
power source before lubricating.
1. Use several drops of Lubriplate FMO-900-
AW gear oil on the lift handle axle, located
under the heating panel assembly.
Lubricate every two weeks.
2. Use Lubriplate FMO-900-AW gear oil to
lubricate the tray holder and wire holder
pivot pins. Lubricate every week.