Belshaw Adamatic HI18 Econo-Icer - Manual (Page 10)

Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
4 MN-1747EN Econo-Icer HI18 & HI24 OM
Cleaning 2
For your safety, observe the following warnings
throughout the entire cleaning process.
WARNING
Thoroughly clean and dry the floor if icing,
water, or other materials are spilled.
Materials spilled on the floor can cause
serious injury or loss of life.
WARNING
To avoid the possibility of shock, unplug
the unit before cleaning.
Once a day, clean as explained below.
1. Remove any debris from the work area
before disassembling the HI Econo Icer.
2. Unplug and remove heating panel assembly
from unit.
3. Remove icing pan.
IMPORTANT
To avoid damage to the wire / frame use
caution when removing and transporting
the wire / frame.
4. Clean the HI Econo Icer with warm water
and mild cleaner.
5. Lift the tray holder over to the right side rest
position, wash with warm soapy water, rinse
and wipe dry.
WARNING
To avoid being burned, wait for icing pan
to cool before removing.
6. Remove retainer knob (HI24-0041 See parts
list) that holds the wire / frame in place and
lift out the wire / frame. Place wire / frame
in automatic dishwasher, use caution so that
the wires do not get damaged.
7. Return the tray holder to the left side rest
position.