Belshaw Adamatic Donut Finishing Center - Manual (Page 7)

Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
Donut Finishing Center OM MN-1757EN 1
1 Operation
Operation
To operate your Donut Finishing Center:
1. Plug the Donut Finishing Center into the
appropriate outlet.
2. Place the pans in the appropriate openings.
Optional: Extend the optional side trays by
lifting the tray to horizontal and sliding
toward the center of the machine to lock.
3. Place toppings in the four unheated pans (see
Figure 1 below).
4. Place icing in the three heated pans (see
Figure 1 below).
5. Turn on the power switch, and allow icing to
come to temperature.
6. Decorate your product.
Shutting Down
1. Turn off the Donut Finishing Center
2. Allow heated pans to cool.
3. Empty the toppings and icing from the pans.
4. Clean the machine.
Figure 1