Belshaw Adamatic Donut Finishing Center - Manual (Page 18)

Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
4 MN-1758EN Donut Finishing Center TS
ICING IS NOT HEATING
Possible Causes What To Do
Snap-disc thermostat is broken. Replace the thermostat.
Dry heat element is not working. Replace the dry heat element.
Blower is not working. Replace the blower.
NO POWER TO MACHINE BECAUSE OF CIRCUIT OVERLOAD
Possible Causes What To Do
Power overload. Flip circuit breaker switch. (Located to the left of
the heated icing pans, on the leg of the frame.)
NO POWER TO MACHINE
Possible Causes What To Do
Toggle switch (ON/OFF switch) is broken. Replace the toggle switch.
Pilot light not glowing. Replace the pilot light.