Belshaw Adamatic TYPE K Depositors - Manual (Page 8)

is postponed or delayed for any reason by the Buyer, the Buyer agrees to reimburse the
Seller for all storage costs and any other expenses resulting from this.
Damaged Shipment -- As a matter of customer service, the Seller will assist in filing
damage or shortage claims, provided the equipment was shipped prepaid and add. If the
shipment was sent “Freight Collect,” the Buyer has the full responsibility of filing the claim
against the freight company. In all cases, the Buyer has the responsibility to inspect the
shipment for completeness and to assure it is free of any visible damage. If the order
does not appear complete or there is visible damage, the Buyer must mark “shipment
not complete” or “visible damage upon receipt” on the Bill of Lading and notify the Seller
and freight carrier no later than one (1) day after the shipment was received. To make
resolution of the claim easier, it is recommended that the Buyer photograph all visible
damage and forward copies to the Seller and freight carrier. All concealed freight damage
claims must be submitted to the freight carrier no later than fifteen (15) calendar days after
receipt of the shipment.
INSTALLATION:
Where applicable, the Buyer at its own expense shall arrange for timely completion
of all necessary preparations for installation, including permits and utilities (water,
gas, electricity, HVAC, etc.) for the purchased equipment. All utilities must conform to
equipment requirements as provided by Seller. The Buyer is responsible for the suitable
construction of foundations or flooring under the equipment. The Buyer shall provide safe,
suitable working conditions for the installation of the equipment. The Buyer is responsible
for the cost of modifying equipment sold by the Seller in order to comply with federal, state
and local codes. If installation, trial run or start-up cannot begin, continue or be accepted
due to a cause for which the Seller has no control, the Buyer shall pay the Seller for any
delays, waiting time or travel expenses incurred as a result of this.
SALES TAX:
It is the responsibility of the Buyer to collect and/or pay all Sales, Use or other applicable
taxes to the local state taxing authority, as required by law. The Buyer must submit a
signed Resale Certificate for equipment purchased for resale or a signed Manufacturer’s
Sales and Use Tax Exemption Certificate for equipment engaged in manufacturing product
for resale. The manufacturing exemption regulations vary from State to State; please
consult your tax consultant for your exemption qualification. Further, the Buyer shall
indemnify and hold harmless Belshaw Adamatic Bakery Group for all costs, expenses and/
or penalties for the failure to pay sales, use or other applicable taxes.
UCC FILINGS:
Where applicable, the Buyer understands and agrees that the Belshaw Adamatic Bakery
Group retains title of all equipment until said equipment is paid for in full. Further, the
Buyer agrees that as part of the sales contract they will be required to sign a Security
Agreement. Further, the Buyer agrees that the Belshaw Adamatic Bakery Group may file
any and all protective UCC filings in relation to the Equipment or this Agreement including,
but are not limited to, financing statements, financing statement amendments, correction
statements, information requests, and addendums to the full extent allowed by law
©BELSHAW ADAMATIC BAKERY GROUP • 814 44TH STREET NW SUITE 103
AUBURN, WA 98001 USA • WWW.BELSHAW.COM • WWW.BELSHAW-ADAMATIC.COM 14
(hereinafter collectively the “UCC Filings”).
By executing this Agreement, the Buyer represents that the Buyer is fully authorized,
as either a principal of the Buyer or a personal guarantor of the Buyer, to enter into all
obligations related to the UCC filings
In states where permissible, the Buyer explicitly authorizes the filing and recording of
UCC financing statements showing the Belshaw Adamatic Bakery Group’s interest in the
Equipment as a secured party and grants the Belshaw Adamatic Bakery Group the right to
execute Buyer’s name as debtor thereto. The Buyer further agrees to provide the Belshaw
Adamatic Bakery Group any and all requested information necessary for any UCC Filings.
This information includes but is not limited to all current address, contact information,
organization identification number, and any other information as required.
CREDIT INFORMATION:
The Buyer further authorizes Belshaw Adamatic Bakery Group and its actual or potential
affiliates, successors, designees, or assignees to obtain consumer credit reports relating
to the Buyer’s credit history and/or creditworthiness. The Buyer’s authorization shall
extend to obtaining a credit profile in considering this application and subsequently for
the purposes of update, renewal or extension of such credit or additional credit and for
reviewing or collecting the resulting account. The Buyer also authorizes the Belshaw
Adamatic Bakery Group, trade references, and financial institutions the right to release
credit information.
LIMITED WARRANTY:
This document is a summary of the major features of the Seller’s warranty. Please
reference the Seller’s Limited Warranty document for complete details of our warranty
program. The Seller warrants its equipment to be free from defects in workmanship and
material which result in equipment failure under normal use and service. The Seller’s
entire liability under this Warranty is limited to repairing or replacing free of charge (at the
Seller’s factory or at Buyer’s premises as determined by Seller) any equipment or parts
thereof which are determined to be defective by the Seller. Unless otherwise specified or
agreed to by the Seller, all equipment carries a parts and labor warranty for a period of one
(1) year from the date of shipment, with the following limitations:
•
Consumable parts and wear items (i.e., lights, gaskets, seals, O-rings, etc.) are not
warranted.
•
Routine general maintenance, preventative maintenance, periodic adjustments and/
or de-liming is not warranted.
•
Equipment or component failures resulting from out-of-spec utilities (i.e., improper
water quality, incorrect power input, etc.) are not warranted.
•
Warranty coverage only applies to equipment sold to the original Buyer and/or End
User at its original place of installation. This warranty is not transferable.
•
Shipping damage is not warranted.
• Pumps and Motors on the SF line of Shortening Filters (SF18, SF24, SF34) are not
Continued over page ►
TYPE K PANCAKE DISPENSER • TYPE K DONUT DEPOSITOR
TYPE K HUSHPUPPY DEPOSITOR • OPERATOR’S MANUAL • MN-1536 111010
15