BECKHOFF DK9222-0411-0038 - Manual (Page 5)

I/O
I/O, Building Automation
Application Note DK9222-0411-0038
It should be noted when binding that, as a matter of principle, only SNVTs of the same type and with an identical
parameterization can be connected to each other. For example, a temperature value will only be transmitted correctly from
one node to another if the resolution and the unit of the temperature value are identically parameterized in both nodes. The
complete configuration sequences are described in detail in the documentation for the KL6401 terminal.
7.1 KS2000
For the commissioning of a LON application, the KL6401 LON Terminal is parameterized accordingly using the KS2000
terminal configuration software. This is followed by the parameterization of the necessary SNVTs using KS2000 and loading
to the terminal. After the activation of the project, the terminal must be switched off once in order to ensure that all data in
the terminal’s internal memory are deleted. After switching off, the XIF file for the LON tool can be exported. In addition, the
parameterization carried out can also be saved as a BLC file (backup). The existing configuration can be easily duplicated;
furthermore, a backup of the SNVTs is saved.
Fig. 2 View of the configuration dialog in the KS2000 terminal configuration software
New Automation Technology Beckhoff 5
For application notes see disclaimer on the last page