Connector description, Serial interface, Usb interfaces – BECKHOFF CP66xx User Manual
Page 8: Network interfaces, Power supply, Ground connection, Status-leds, Status-leds 6
Product Description
X107
Power
Socket 5-pol RM3.50 Sw Screw Clamp
BL3.5/180F (WEIDMÜLLER 1615810000)
Pin
Function
1
NC
2
NC
3
4
-
5
+
24 V DC
Power Supply
Connector description
Serial interface
X102
Serial interface COM1
The Control Panel is equipped with a COM1 (X 102) serial interface (Type
RS232) for the connection of serial peripheral devices.
USB interfaces
X103
USB out
The USB interface (X 103) (connector type A) is used for connecting
peripheral devices with USB connection (e.g. keyboard, mouse).
USB 1.1 standard is supported.
X104
USB out
The USB interface ( X104) (connector type A) is used for connecting
peripheral devices with USB connection.
USB 2.0 standard is supported.
Network interfaces
X105, X106
Network
The RJ-45 sockets (X 105, X 106) enable connection of the Control Panel
to a 10/ 100 MBit Ethernet network.
Power supply
X107
Power
The power supply for the Control Panel is established via the
socket (X 107).
Ground connection
Ground connection
The Control Panel is grounded via the stud bolt.
Status-LEDs
Description of the Status-
LEDs
The Status-LEDs are located
near the connectors:
Fieldbus (1):
run
Fieldbus (2):
error
HDD (3):
active
User (4):
Can be defined by user
Not connected (5):
-
24 V in (6):
Power Supply is established
1 3 5
2 4 6
6
CP66xx