Dual DC365 - Manual (Page 6)

DC265 / DC365 INSTALLATION
6
Parallel or series wiring is not recommended for these speakers. The speakers should
only be connected to receivers with 4-8 ohm amplifier loading. Avoid parallel or series
wiring your Dual speakers with any other speaker type or brand.
Always connect speaker wires using the correct polarity. Speaker wires are marked for
polarity consistency so that you can determine the positive and negative identity of the
individual wires within the molded pair insulation. Polarity is shown by either a color stripe
on the insulation, by ridges molded into one side of the insulation, the color of the insulation
case around the wire, or by the color type or colors of the wires/wire itself (copper or
silver).
Important: In order to maintain correct polarity, always connect speaker wire using the
positive (+) terminal on the receiver to the positive (+) wire, and the negative (-) terminal on
the receiver to the negative (-) wire.
Installation Tips