Dual DC365 - Manual (Page 5)

5
DC265 / DC365 INSTALLATION
Caution: Do not attempt to connect the speakers to any source, amplifier or receiver that is
turned on. Be sure the receiver is off prior to connecting the speakers.
Adhere to all electrical and building code requirements for your area.
The minimum mounting depth of 4" measured from the face of the wall or ceiling is needed
for proper clearance. The speakers can be placed beside studs or other wall interior items
but avoid near proximity to pipes, machinery and high amperage wiring.
The DC265 is designed to use the wall cavity as the enclosure. It is not necessary to install
an enclosure unless required to do so by local electrical or fire regulations.
The mounting tab brackets incorporated into the speakers can accommodate sheet rock or
wall board thicknesses of 1/2” to 1-3/8”. Spacers or longer screws can be used on thinner
or thicker surfaces.
Adding insulation such as 3" to 4” insulation or damping material behind the speaker
generally improves the sound quality.
Installation Tips
Built-in “easy turn” wall mounting tabs
Push Lock Speaker Terminals