Interfaces, Serial interfaces, Network connection – BECKHOFF CP63xx User Manual
Page 10: Ps/2 connections, Vga connection, Free slot, Usb interfaces, Dvi interface, Interfaces 8
Product Description
Interfaces
Interfaces of the
Built-in Panel PC CP63xx
Serial interfaces
RS 232
COM1 - COM2
The basic version of the CP63XX Industrial PC has two serial interfaces,
COM1 (1) and COM2 (2), using the type RS232, which are brought to a 9
pin SUB-D plug connector.
Network connection
Network
The PC is connected with the local network via the 10/100 Base-T RJ-45
connector (3) of the on-board Ethernet adapter.
PS/2 connections
PS/2
The upper PS/2 connector (4) allows a PS/6 mouse to be used, while a PC
keyboard can be connected to the lower PS/2 connector (7).
VGA connection
VGA
A 15-pin SUB-D socket connector (5) allows a VGA monitor to be
connected.
free slot
free slot
A free slot (7) enables the expansion of the Industrial PC with a PCI plug-in
card.
The type plate of the PC housing provides information about the
configuration of the Industrial PCs in the delivery state.
USB interfaces
USB1 – USB2
One of the two USB interfaces (8) and
(9) is used for connecting the Control
Panel.
The remaining port can be used to
connect peripheral devices with USB
interface.
DVI interface
DVI
The DVI interface (10) is used for connecting the Control Panel.
3
1
4
7
5
2
6
8
9
10
8
CP63xx