Controls, Blade drive, Throttle control lever – Dixon Speedztr 44/968999538 User Manual
Page 21: Choke control, Circuit breaker
![background image](/manuals/75670/21/background.png)
CONTROLS
21
15
STOP
P
U
SH
TO RES
ET
THROTTL
BLADE
DRIVE
CHOKE
15
STOP
P
U
SH
TO RES
ET
BLADE
DRIVE
—
Fig. 4
—
BLADE DRIVE
•
Located on the operator’s right.
•
To engage the mower blade, pull the knob to the ON
position.
•
To disengage mower blade, push the knob to OFF
position.
THROTTLE CONTROL LEVER
•
Located on control panel to
operator’s right.
•
Throttle control for engine
speed.
•
Throttle control should be set
to MAXIMUM or wide open
setting to insure adequate
cooling of the engine and to
maintain mower deck blade
speed while mowing.
CHOKE CONTROL
•
Choke for engine starting. On the 36"
and 42" models, the choke is
combined with the throttle. See Fig. 3.
The 44" has a separate choke cable.
See Fig 4.
CIRCUIT BREAKER
•
Protection of the electrical system is
by (1) 15 amp circuit breaker
•
If circuit breaker trips, push button
(lower left side of control panel ) to
reset.
•
If this condition repeats, consult dealer
for inspection and repair
—
Fig. 3
—
Maximum
Throttle
Setting
Choke
Position