Dixon Speedztr 44/968999538 - Manual (Page 16)

Additional information may be provided elsewhere in this manual.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
16
SPECIFICATIONS
Chassis:
Body:
Mower Deck:
Blade Drive:
Transmission:
Engine:
Starting
System:
Tires:
Capacities:
Dimensions:
1½ " x 2 " rectangle tubular side frame
Body parts are made of steel
42" (91cm) 13 gauge stamped 2 blade deck
Electric clutch
Each rear wheel is independently driven by a
Hydro Gear EZT hydrostatic drive with cooling
fan.
16.5 HP Briggs & Stratton Intek, 4-cycle, single
cylinder, overhead valve, air-cooled, gasoline,
vertical shaft, cast iron cylinder, full pressure lube
with spin-on filter
Electric-key switch operation with safety interlocks
on park brake, steering levers and blade drive.
Front 11 x 4.00-5 smooth tread 16-21 PSI
(110-145 kPa)
Rear 18 x 8.50-8 4-ply turf tread 8-14 PSI
(55-97 kPa)
Fuel 4.5 gallon (17 liters)
Engine Oil 1.3 quarts (1.3 liters)
Width 43 " (109 cm) maximum track width
Height 43 " (109 cm) to top edge of seat
Length 69 " (175 cm) hitch tab to front
Weight 537 lbs. (244 kg)
SpeedZTR™ 42 Model 968999546