Baumatic BDF665W - Manual (Page 38)

o
Ensure that the underneath of the worktop is clean before
sticking the strip to it.
o
Separate the backing paper away from the strip.
o
Stick the condensation strip to the underneath of the worktop.
o
IMPORTANT: Failure to attach the condensation strip could
result in damage to your worktop.
Connecting to the mains water supply
38
ed.
IMPORTANT: Do not connect the appliance to your mains
water supply using an old or an existing water inlet hose.
The inlet hose supplied with the dishwasher is the ONLY one
that should be us
DO NOT CONNECT THE WATER INLET HOSE TO A HOT
WATER TAP.
o
The inlet hose will be located inside the cabinet of the dishwasher.
o
Connect the water inlet hose to a threaded water tap that has a
3/4” thread and to the inlet hose connector on the appliance.
o
Fully tighten the inlet hose to the water tap and the dishwasher.
o
IMPORTANT: It is important that you turn off the water tap
after use.