Baumatic BDF665W User Manual
Page 10
Control panel
1) Power
button
2) LED display (+ rinse aid and salt required indicator neons)
3) Delay start button
4) Program selection buttons
Using your dishwasher
Before first use
o
Install the appliance as per the installation instructions contained
within this booklet.
o
Fill the water softener with 0.5 litres of tap water and then fill
with specialist dishwasher salt. After this you should set the
water softener level.
o
Fill the rinse aid dispenser and then set the rinse aid dosage.
Filling with dishwasher salt
IMPORTANT: You should only use salt that is specially
designed for use in a dishwasher. If any other type of salt is
used in the appliance (in particular table salt), it will damage
the water softener.
o
Ideally you should fill the water softener with salt, just before
you are about to run a wash program. This will help to clear any
salt that may have overflowed from the water softener during
the salt filling process.
o
Open the door of the dishwasher and then remove the lower
basket. The basket should be empty when you remove it.
10