Baumatic BMC253SS - Manual (Page 35)

o
Place the microwave into the housing unit.
o
IMPORTANT: Do not push the microwave fully into the housing
unit, as you still need to be able to access adjustment screw B at
this stage of the installation.
o
IMPORTANT: Make sure that the oven feet are sitting correctly
in the grooves on the bottom brackets.
o
Turn adjustment screw B, ensuring that there is a 1 mm gap
between adjustment screw B and the underneath of the top
surface of the housing unit.
o
Push the microwave fully into the housing unit.
o
IMPORTANT: Care should be taken to ensure that you do not
trap or kink the power cord.
o
Open the microwave door and locate screw-hole C. Use screw C
to fix the microwave oven to the housing unit. A screw cover is
provided to cover the screw cap.
35