Baumatic BMC253SS - Manual (Page 29)

o
The microwave should be thoroughly cleaned before it is
operated for the first time and after each use. This will avoid
residual food stuffs becoming baked on the oven cavity. After
residues have been baked on several times, they are far more
difficult to remove.
o
Never clean the oven surfaces by steam cleaning.
o
If you use any form of oven cleaner on your appliance, then you
must check with the manufacturer of the cleaner that it is
suitable for use on your appliance.
o
DO NOT use abrasive cleaners or sharp objects to clean the
glass of the microwave as this can damage the glass and lead to
shattering.
o
Any damage that is caused to the appliance by a cleaning
product will not be fixed by Baumatic free of charge, even
if the appliance is within the guarantee period.
Installation
The installation must be carried out by a suitably
qualified person, in accordance with the current
version of the following.
o
UK Regulations and Safety Standards or their European
Norm Replacements.
o
Building Regulations (issued by the Department of the
Environment).
o
Building Standards (issued by the Scottish Development
Department).
o
IEE Wiring Regulations.
o
Electricity At Work Regulations.
Electrical connection
YOUR MICROWAVE IS INTENDED FOR FITTED AND
PERMANENT INSTALLATION.
o
Before connecting the appliance, make sure that the supply
voltage marked on the rating plate corresponds with your mains
supply voltage.
o
We recommend that the appliance is connected by a qualified
electrician, who is a member of the N.I.C.E.I.C. and who will
comply with the I.E.E. and local regulations.
29